DRAGON DROP DECK CONTAINER Drop | Step Deck Trailers For Sale

Details

General Specs

DRAGON 42 x 102 Drop | Step Deck Trailers

Drop | Step Deck Trailers

Beaumont TX USA


General Specs

DROP DECK CONTAINER

New

42 ft

102 in

41.0 in

NOT SPECIFIED

3


Body, Door, and Floor Specs

NOT SPECIFIED


Detailed Description

3 Axle Removable Neck Trailer

Specifications:
• Type: Low Profile Level Deck with removable neck.
• Payload: 50 tons (100,000 lb) distributed over 16 ft.
• Overall length: 56’-7”
• Deck length: 42’-0”
• Deck width: 8’-6” (102”)
• Deck height: 3’-5” (41”)

50 Ton 3 Axle Heavy Haul Trailer
• Deck Camber: 1-1/2” nominal, neck to first axle
• King Pin settings: 16” and 34”
• Swing Clearance: 8’ - 6” (102”) and 10’ -0” (120”)
• Frame: 4 beam design. Fabricated beams from a
A514 T-1 high tensile steel flanges and webs. Main beams boxed
reinforced at critical deck transition, 2-1 minimum safety factor at
maximum payload stresses
• Front Deck: 27’-9” L, 2” apitong attached at ends and every other
crossmember.
• Rear Deck: 14’ – 3” L including tail roller, 1/4” steel plate deck,
continuous
welds on top, intermittent welds on under side
• Neck: Mechanical removable with roller at rear, 2 King Pin locations,
spare tire carrier each side (spare tires optional)
• Rear Deck Roller: 8” SCH 160 pipe (8 5/8” OD) with double spherical
bearings, 2 sets of over load rollers, grease fittings on main roller and
overload rollers
• Neck Roller: 6” SCH 160 pipe (6-5/8” OD) with double spherical
bearings, grease fittings, cable guide flanges
• Deck Load Rollers: 6” sch 160 pipe (6-5/8” OD) with double spherical
bearings, grease fittings, air operated to raise, spring load to lower,
used to assist in unloading skidded loads off the rear
• Pin Pockets: 1 each side at rear on 45 degree angle with 1/2” grab
hooks, (2) 3“ id each side in main deck inside outer beam, 6 each side
on outside of outer beam
• D Rings: 16 on each side, outside of outer beam, 2 inside of neck
• Outriggers: 13 each side, forged heavy duty, locking against beam and
at 90 degrees to beam
• Traction Cleats: 3/4” x 1” A514 T-1 steel, continuous welds solid on up
hilltop, intermittent welds on downhill side
• Suspension: 30,000 lb. (per axle) air ride, air lift on front axles, manual
dump all axles, travel limit straps on all axles
• Axles: 3 - 25,000 lb. round with outboard drums
• Wheels: 10 hole steel disc hub pilot
• Axles: 5 -25,000 lb. round with outboard drums
• Tires: 255R/70 x 22.5 Radial
• Brakes: 16 1/2 x 7, spring parking brakes on 4 axles, auto slack adjusters
• Bumper: 4” SCH 80 pipe with 4 - D rings
• Mud Flaps: Anti Sail
• Lights: Full DOT lights, sealed led lights
• Coating: All surfaces near white metal steel grit blast, 2.5 ml profile
(SP-6), primed and color coated {before decking) with high solids
polyurethane, 4-6 ml dry film thickness
Back